Претраживање
Приказ резултата 1-10 од 14
Activation energies as the validity criterion of a model for complex reactions that can be in oscillatory states
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2007)
Modeliranje ma kog kompleksnog reakcionog sistema je težak zadatak. Ako ispitivani sistem može da postoji u različitim oscilatornim dinamičkim stanjima, prividne energije aktivacije, koje odgovaraju različitim reakcionim ...
The Chemometric Study of Limestone Physico-chemical Properties and Thermal Behavior for Application in Construction Composites
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
The limestone, as an economically sustainable and easily available basic raw material, is frequently utilized in the building industry for resolving of the environmental protection issues. The limestone is incorporated in ...
Thermal, Ceramic and Technological Properties of Clays used in Production of Roofing Tiles - Principal Component Analysis
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
This research describes a study of 11 selected samples of brick clays applied in roofing tile production, by using simultaneous thermal analysis. Additionally, the laboratory-sized samples were prepared and fired (850-950 ...
Isokinetic Parameters of Thermal Degradation of Powder of [Cd(N-Boc-gly)(2)(H2O)(2)](n)
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
The coordination polymer [Cd(N-Boc-gly)(2)(H2O)(2)](n) undergoes thermally induced degradation in temperature region between 60 and 900 degrees C. Kinetic parameters were determined for dehydration (63-123 degrees C) and ...
Chemometric Analysis of Alternations in Coal Ash Quality Induced by Application of Different Mechano-chemical Processing Parameters
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
The coal fly ash mechano-chemical activation conducted via high energy ultra-centrifugal mill was optimized using mathematical and statistical tools. The aim of the investigation was to accent the merits of alternations ...
Formation of Porous Wollastonite-based Ceramics after Sintering With Yeast as the Pore-forming Agent
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
In this paper, synthesis of porous wollastonite-based ceramics was reported. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, ...
An Artificial Neural Network-based Prediction Model for Utilization of Coal Ash in Production of Fired Clay Bricks: A review
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2021)
This study analyzed the last 20 years' data available on power plant coal ashes used in clay brick production. The statistical analysis has been carried out for a total of 302 cases based on the relevant parameters reported ...
Thermal and Mechanical Behavior of Composite Mortars Containing Natural Sorptive Clays and Fly Ash
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Mineral additives are extensively applied as cement replacement materials in both construction concrete and mortar. Fly ash is one of the most commonly utilized additives which improve Theological properties, as well as ...
Synthesis, characterization and electrochemical properties of iron doped phosphate tungsten heteropoly acid (Fe-PWA) and it’s bronze (Fe-PWB): Comparative study
(Association for ETRAN Society, 2023)
In this work, synthesized 12-tungstenphosphoric acid (H3PW12O40 × nH2O; PWA) was further ionically exchanged with Fe3+ ions, which led to the formation of the 12-tungstophosporic acid iron salt, (FePW12O40 × nH2O; Fe-PWA). ...
Novel Approach for Determination of Potentially Toxic Elements via ICP-OES in Aqueous Solutions of Building Materials with Industrial Byproduct Addition
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
New global tendencies for waste materials reusing in building materials are imposing the request for improved performances of chemical analysis methods and the improvements of matrices used. A new method for optical emission ...