Laser surface texturing of Ti/Cu/Ti and Ti/Cu/Zr/Ti multilayers thin films
Само за регистроване кориснике
2022
Аутори
Bozinović, NevenaRajić, Vladimir
Kisić, Danilo
Milovanović, Dubravka
Savović, Jelena
Petrović, Suzana
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this study, the design of surface pattering with the co-existence of micrometer and nanometer features was carried out to improve the arrayed surface structures on Ti/Cu/Ti and Ti/Cu/Zr/Ti multilayer thin films by picosecond laser processing. The novel composite structure consisted of two layers of Ti and subsurface distributed Cu and Zr layers (thickness of 10 nm) were deposited by ion sputtering on Si substrate to the total thickness of 300 nm. The changes in the composition, surface morphology, and wetting properties after laser modification was monitored by Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS), optical profilometry, and wettability measurements. It was found that laser irradiation can induce the melting of material with the formation of wrinkled periodic structures at the edges of the laser spots in both systems as a consequence of the hydrodynamic effects. Another interesting result was that the periodic structure in form of LSFL (low spati...al frequency LIPSS) ripples was numerous but slightly pronounced in Ti/Cu/Zr/Ti, due to the presence of the Zr component as an ultra-thin subsurface layer, which most likely favored creating LIPSS. Such laser texturing has been used in the biomedical field as a method of developing surface topography, coated with oxides to potentially improve cell response via suitable surface wetting for a biological system.
Кључне речи:
Wrinkled periodic structures / Wetting properties / Titanium thin films / Picosecond laser / Laser-induced modificationИзвор:
Optical and Quantum Electronics, 2022, 54, 9Финансирање / пројекти:
- Ministry of Education, Science, and Technological Development of the Republic of Serbia
- COST-European Cooperation in Science and Technology [CA17126]
DOI: 10.1007/s11082-022-03910-6
ISSN: 0306-8919
WoS: 000830731300009
Scopus: 2-s2.0-85134830049
Институција/група
Institut za opštu i fizičku hemijuTY - JOUR AU - Bozinović, Nevena AU - Rajić, Vladimir AU - Kisić, Danilo AU - Milovanović, Dubravka AU - Savović, Jelena AU - Petrović, Suzana PY - 2022 UR - https://riofh.iofh.bg.ac.rs/handle/123456789/944 AB - In this study, the design of surface pattering with the co-existence of micrometer and nanometer features was carried out to improve the arrayed surface structures on Ti/Cu/Ti and Ti/Cu/Zr/Ti multilayer thin films by picosecond laser processing. The novel composite structure consisted of two layers of Ti and subsurface distributed Cu and Zr layers (thickness of 10 nm) were deposited by ion sputtering on Si substrate to the total thickness of 300 nm. The changes in the composition, surface morphology, and wetting properties after laser modification was monitored by Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS), optical profilometry, and wettability measurements. It was found that laser irradiation can induce the melting of material with the formation of wrinkled periodic structures at the edges of the laser spots in both systems as a consequence of the hydrodynamic effects. Another interesting result was that the periodic structure in form of LSFL (low spatial frequency LIPSS) ripples was numerous but slightly pronounced in Ti/Cu/Zr/Ti, due to the presence of the Zr component as an ultra-thin subsurface layer, which most likely favored creating LIPSS. Such laser texturing has been used in the biomedical field as a method of developing surface topography, coated with oxides to potentially improve cell response via suitable surface wetting for a biological system. T2 - Optical and Quantum Electronics T1 - Laser surface texturing of Ti/Cu/Ti and Ti/Cu/Zr/Ti multilayers thin films IS - 9 VL - 54 DO - 10.1007/s11082-022-03910-6 UR - conv_1029 ER -
@article{ author = "Bozinović, Nevena and Rajić, Vladimir and Kisić, Danilo and Milovanović, Dubravka and Savović, Jelena and Petrović, Suzana", year = "2022", abstract = "In this study, the design of surface pattering with the co-existence of micrometer and nanometer features was carried out to improve the arrayed surface structures on Ti/Cu/Ti and Ti/Cu/Zr/Ti multilayer thin films by picosecond laser processing. The novel composite structure consisted of two layers of Ti and subsurface distributed Cu and Zr layers (thickness of 10 nm) were deposited by ion sputtering on Si substrate to the total thickness of 300 nm. The changes in the composition, surface morphology, and wetting properties after laser modification was monitored by Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS), optical profilometry, and wettability measurements. It was found that laser irradiation can induce the melting of material with the formation of wrinkled periodic structures at the edges of the laser spots in both systems as a consequence of the hydrodynamic effects. Another interesting result was that the periodic structure in form of LSFL (low spatial frequency LIPSS) ripples was numerous but slightly pronounced in Ti/Cu/Zr/Ti, due to the presence of the Zr component as an ultra-thin subsurface layer, which most likely favored creating LIPSS. Such laser texturing has been used in the biomedical field as a method of developing surface topography, coated with oxides to potentially improve cell response via suitable surface wetting for a biological system.", journal = "Optical and Quantum Electronics", title = "Laser surface texturing of Ti/Cu/Ti and Ti/Cu/Zr/Ti multilayers thin films", number = "9", volume = "54", doi = "10.1007/s11082-022-03910-6", url = "conv_1029" }
Bozinović, N., Rajić, V., Kisić, D., Milovanović, D., Savović, J.,& Petrović, S.. (2022). Laser surface texturing of Ti/Cu/Ti and Ti/Cu/Zr/Ti multilayers thin films. in Optical and Quantum Electronics, 54(9). https://doi.org/10.1007/s11082-022-03910-6 conv_1029
Bozinović N, Rajić V, Kisić D, Milovanović D, Savović J, Petrović S. Laser surface texturing of Ti/Cu/Ti and Ti/Cu/Zr/Ti multilayers thin films. in Optical and Quantum Electronics. 2022;54(9). doi:10.1007/s11082-022-03910-6 conv_1029 .
Bozinović, Nevena, Rajić, Vladimir, Kisić, Danilo, Milovanović, Dubravka, Savović, Jelena, Petrović, Suzana, "Laser surface texturing of Ti/Cu/Ti and Ti/Cu/Zr/Ti multilayers thin films" in Optical and Quantum Electronics, 54, no. 9 (2022), https://doi.org/10.1007/s11082-022-03910-6 ., conv_1029 .