What is the most relevant method for water absorption determination in ceramic tiles produced by illitic-kaolinitic clays? The mystery behind the gresification diagram

Abstract

This study presents the 51 mixtures of ceramic clays characterized by using XRF, XRD, granulometry, and dilatometry analyses. After firing in a 1000-1250 degrees C range, water absorption (WA) according to EN standards by boiling in water, under vacuum, and by 24h soaking is determined. The results indicated that there was a high and statistically significant correlation between the standard methods, but the testing under vacuum gave the highest saturation of the samples fired at 1200 degrees C and 1250 degrees C. It is determined that these illitic-kaolinitic clays can be used to produce floor ceramic tiles belonging to the BIIa group (water absorption between 3% and 6%). The study also aimed to reveal which method of WA determination is suitable to read the sintering interval from the gresification diagrams, which is compared to the beginning of sintering as read from dilatometry curves.