Modeling, Simulation, and Computer Control of a High-Frequency Wood Drying System

Abstract

High-frequency wood drying is the modern method used in raw wood drying so that treated wood can be used further in various processes. Such systems are used because of the economy, energy efficiency, obtaining of good mechanical properties of the wood after treatment, as well as reducing time consumption. Therefore, it is extremely important to understand each component of such systems and processes. The mentioned systems are implemented using high-frequency generators based on vacuum tubes (VT). Their development and, in particular, optimization are by far more complex than the transistor systems; therefore, the development is now compelled to rely on computer modelling and simulation. In this research, a high-frequency (HF) generator of 20 kW output power and 1.5-15 MHz adjustable frequency based on VT was produced and then, with the corresponding model for VT itself and the rest of the developed circuit, was followed by computer simulation and real-system measurement. The model parameters were adjusted, which provided additional system optimization. An extra match of the results from the simulation and measurement was obtained; thus, the optimization was performed faster and more precisely. In addition, an easier and quicker way of adjusting parameters of the PID controller using a developed software-based control system was attained. The problems of cooling the VT anode under high DC voltage, as well as temperature measurement in the HF electric field, have been solved.